High-power two-color plasma-based THz generation driven by a Tm-doped fiber laser.

We report on the efficient generation of broadband THz radiation based on a two-color gas-plasma scheme. Broadband THz pulses covering the whole THz spectral region, from 0.1-35 THz, are generated. This is enabled by a high-power, ultra-fast, thulium-doped, fiber chirped pulse amplification (Tm:FCPA) system and a subsequent nonlinear pulse compression stage that uses a gas-filled capillary. The driving source delivers 40 fs pulses at a central wavelength of 1.9 µm with 1.2 mJ pulse energy and 101 kHz repetition rate. Owing to the long driving wavelength and the use of a gas-jet in the THz generation focus, the highest reported conversion efficiency for high-power THz sources (>20 mW) of 0.32% has been achieved. The high efficiency and average power of 380 mW of the broadband THz radiation make this an ideal source for nonlinear, tabletop THz science.

Nonlinear pulse compression to sub-two-cycle, 1.3†mJ pulses at 1.9†µm wavelength with 132†W average power.

We report the nonlinear pulse compression of a high-power, thulium-doped fiber laser system using a gas-filled hollow-core fiber. The sub-two cycle source delivers 1.3 mJ pulse energy with 80 GW peak power at a central wavelength of 1.87 µm and an average power of 132 W. This is, so far, to the best of our knowledge, the highest average power of a few-cycle laser source reported in the short-wave infrared region. Given its unique combination of high pulse energy and high average power, this laser source is an excellent driver for nonlinear frequency conversion, toward terahertz, mid-infrared, and soft X-ray spectral regions.

Inband-pumped, high-power thulium-doped fiber amplifiers for an ultrafast pulsed operation.

We investigate the influence of the pump wavelength on the high-power amplification of large-mode area, thulium-doped fibers which are suitable for an ultrashort pulsed operation in the 2 µm wavelength region. By pumping a standard, commercially available photonic crystal fiber in an amplifier configuration at 1692 nm, a slope efficiency of 80 % at an average output power of 60 W could be shown. With the help of simulations we investigate the effect of cross-relaxations on the efficiency and the thermal behavior. We extend our investigations to a rod-type, large-pitch fiber with very large mode area, which is exceptionally suited for high-energy ultrafast operation. Pumping at 1692 nm leads to a slope efficiency of 74 % with a average output power of 67 W, instead of the 38 % slope efficiency obtained when pumping at 793 nm. These results pave the way to highly efficient 2 µm fiber-based CPA systems.

Ultrafast Tm-doped fiber laser system delivering 1.65-mJ, sub-100-fs pulses at a 100-kHz repetition rate.

High-energy, ultrafast, short-wavelength infrared laser sources with high average power are important tools for industrial and scientific applications. Through the coherent combination of four ultrafast thulium-doped rod-type fiber amplifiers, we demonstrate a Tm-doped chirped pulse amplification system with a compressed pulse energy of 1.65 mJ and 167 W of average output power at a repetition rate of 101 kHz. The system delivers 85 fs pulses with a peak power of 15 GW. Additionally, the system presents a high long- and short-term stability. To the best of our knowledge, this is the highest average output power short wavelength IR, mJ-class source to date. This result shows the potential of coherent beam combining techniques in the short wavelength infrared spectral region for the power scalability of these systems.

Compact, diode-pumped, unstable cavity Yb:YAG laser and its application in laser shock peening.

We present the setup of a compact, q-switched, cryogenically cooled Yb:YAG laser, which is capable of producing over 1 J output energy in a 10 ns pulse at 10 Hz. The system's design is based on the recently published unstable cavity layout with gain shaping of the spatial intra-cavity intensity distribution. Using a hexagonal homogenized pump beam, the laser generated an according hexagonal output beam profile. The suitability of such laser properties for the intended use in a laser shock peening process is demonstrated. In the experiment an aluminum plate was treated and the generated residual stresses in the sample subsequently measured. Other applications of this laser system like laser pumping or surface cleaning are conceivable.